Growing jobs: how to get in · 7 min read
Heat pump installer: training and demand
Heat pumps are replacing gas boilers and furnaces, and installers are in short supply. The training routes, qualifications, pay and how to test the work.
The short answer
To become a heat pump installer in the UK, most people start as qualified heating engineers, plumbers or electricians and add a heat pump qualification, often a short course of a few days, plus training on system design, water regulations and, for some work, F-gas certification. Installers working on Boiler Upgrade Scheme jobs must work for MCS-certified companies. New entrants can take a heating and ventilating or plumbing apprenticeship. In the US, heat pumps are installed by HVAC technicians, usually trained through technical programmes or apprenticeships, with EPA Section 608 certification for refrigerants. Demand is growing because governments are pushing heat pumps to cut emissions, and there aren't enough skilled installers. Good installation, especially design and sizing, is what makes heat pumps work well.
Key takeaways
- UK: heating, plumbing or electrical background plus a heat pump course.
- US: HVAC technician training and EPA refrigerant certification.
- Demand is rising faster than the supply of installers.
- System design and sizing skills separate good installers from poor ones.
On this pageWhat heat pump installers do
What heat pump installers do
The job starts with a survey: measuring rooms, calculating heat loss and checking radiators, pipework and space for the outdoor unit and hot water cylinder. Then comes design, installation, commissioning and showing the customer how to use the system. Customers often need reassurance, because heat pumps run differently from boilers.
Routes in
| Starting point | UK route | US route |
|---|---|---|
| Qualified heating engineer or plumber | Heat pump course, MCS company | Add heat pump training |
| Electrician | Heat pump and plumbing modules | Partner with HVAC |
| New entrant | Plumbing or heating apprenticeship | HVAC programme or apprenticeship |
| Refrigerant work | F-gas certification | EPA Section 608 |
The practice task (fictional)
A couple in a 1930s semi want a heat pump to replace their old gas boiler. They have small radiators, single-glazed windows in two rooms and a tight budget. They've heard heat pumps don't work in old houses.
- What would you measure on the survey?
- What would you tell them about radiators and windows?
- How would you set honest expectations about running costs?
- When would you advise them not to go ahead yet?
Is it right for you?
Heat pump work suits practical people who also enjoy planning and calculations, and who can explain technical ideas to worried customers. It's more design-heavy than boiler swaps. If you liked the fictional task above, and wanted to get the calculations right, you'll probably enjoy the work.
Pay and prospects
Experienced installers can earn well, and many run their own businesses. Demand depends on government targets, grants and energy prices, which can shift. Installers who also understand insulation, solar and batteries can offer complete home energy upgrades, which makes them more resilient.
Getting in
If you're already a heating engineer, book a heat pump course and ask MCS-certified companies about work. If you're starting out, look for plumbing or heating apprenticeships with firms that install heat pumps. OffLadder CV reads each post and shows which must-haves your CV doesn't show yet.
What to do this year
If you already work in plumbing, heating or air conditioning, ask your employer or a manufacturer about a short heat pump course, since many run them for existing trades. If you are new, look for an HVAC or plumbing apprenticeship and treat heat pumps as the specialism. Shadow a survey visit if you can, because sizing the system and explaining it to a homeowner is half the job.
Illustrative example
Gary, a gas engineer for 20 years, worries about the future of boilers. He takes a heat pump course, works alongside an experienced installer for six months, and now does mostly heat pump installs, with a waiting list.
Test a future job before you train for it
A forecast can tell you which jobs are growing. It can't tell you whether you'd enjoy the work. Laddie, our AI coach, starts from the experience you already have and works through four steps with you:
- Explore: directions your experience carries into, including work that's only now taking shape as AI changes jobs.
- Try: an experiment small enough to finish this week, a small piece of the work itself.
- Learn: note which part you liked and which part you avoided, and keep it as a record of what you tried.
- Apply: when a direction turns into a job post, OffLadder CV shapes your CV for it. What you can't show yet goes back to Laddie as a short lesson, a 15-minute task and a mock interview.
Questions people ask
- How long does heat pump training take?
- For a qualified heating engineer, a heat pump course can take a few days to a couple of weeks. From scratch, a plumbing or HVAC apprenticeship takes two to four years.
- Do I need to be a plumber first?
- In the UK, most heat pump courses expect a heating or plumbing qualification or equivalent experience. Some newer routes combine training for new entrants.
- What is the Boiler Upgrade Scheme?
- A UK government grant towards the cost of replacing fossil fuel heating with a heat pump. It must be installed by an MCS-certified installer.
- Is heat pump work well paid?
- Experienced installers and engineers who can design systems are well paid and in demand, especially in areas with few installers.
- Why do some heat pumps perform badly?
- Usually because of poor design: the wrong size, radiators too small, or the home not assessed for heat loss. Good installers do this carefully.
- What about the US?
- Heat pumps are installed by HVAC technicians, and demand is growing, especially in colder states with incentive programmes.
- Can gas engineers retrain?
- Yes, and many are. Gas engineers already know heating systems and customers, so the move is natural, though heat pumps need different design thinking.
Exercises are practice, not evidence of career fit or a qualification. How to read our guides and report a correction.
Sources
- Apply for the Boiler Upgrade Scheme · GOV.UK
- Find an MCS certified installer · MCS
- Heating, air conditioning, and refrigeration mechanics and installers: Occupational Outlook Handbook · US Bureau of Labor Statistics
How this page is written
Sources support the factual background, not a guarantee that an exercise predicts career fit. Fictional practice material is labelled. Dates record content updates; no independent expert review is implied. More about OffLadder.